|Conductor Bar Systems
|FABA® 100 Conductor Rail System
The lifeline for Monorail Systems. The rapid growth of just-in-time production and delivery practices has increased demand for more
productive, continuous workflows. To meet this demand, Magnetek offers FABA-100, the compact conductor rail for today's electrified monorail
FABA's simple, yet superior design is quickly placing older technologies on the endangered species list for industrial applications. And with
good reason: FABA offers tremendous flexibility and advantages you won't find anywhere else.
Designed to ensure maximum protection against accidental electrical contact, the conductor rail system is enclosed in impact-resistant PVC
housing which is non-flammable and chemically resistant against most volatile materials. The system provides further security through the use
of sturdy plastic hangers and collector arm components. Plus, conductor rails are available in different colors to provide visual identification
of power, ground, neutral, communications and other pathways for safe and efficient trouble-shooting. FABA meets European safety standards for
FABA's specially designed, compression spring-loaded collector shoes won't jump out of the rails as other designs allow. This ensures continuous
electrical contact and maximum load control. FABA also provides reliable performance in both indoor and outdoor applications. And, since FABA
does not require chains, belts, or other moving parts, it virtually eliminates the need for maintenance. Even our collector shoes can provide
thousands of hours of use before replacement is required.
FABA is designed to work with systems of all types for continuous flow production, such as monorails, workstations, automated systems and more.
Installation is easy, with parts that fit together in a simple, intuitive way. FABA provides flexibility; taking power up, down, under, over,
around- wherever it's needed in virtually any direction, level, or work area imaginable. FABA use ranges from carrier only applications to part
of a fully automated, computer controlled system managing multiple workloads simultaneously.
FABA 100 Design Features
Conductor bar is enclosed in an impact resistant PVC housing
Conductor bar insulating sleeve is flame resistant and self-extinguishing
Meets European Finger Safe Standards (IP 2x)
Conductors are available in different colors to provide visual identification of power, ground, neutral,
communications and other pathways for safe and efficient troubleshooting.
Compression spring loaded collector shoes ensure better continuous electrical contact and precise system
control Conductor bar is rated at 100 Amp
Collector assemblies available from 20 Amp to 50 Amp ratings
Standard hangers available for most AMS profiles: 180mm x 60mm profiles - maximum 8 conductors
240mm x 80mm profiles - maximum 12 conductors
Maximum traveling speed of 1312 ft/min (400m/min)
Standard conductor bar rated for -30oC to +55oC ambient operating environments. (High temperature
conductor bar for up to 80oC is available on a special order basis.)
FABA 100 Conductor Rail System Brochure
FABA 100 Conductor Bar Systems Installation Instructions 005-1062
FABA Conductor Bar System Standard Components 000-2201
|ELECTROBAR® 8-Bar Enclosed Conductor Bar System
ELECTROBAR 8-Bar Enclosed Conductor Bar Systems are the practical, proven and economical way to deliver electricity to overhead cranes,
hoists, monorails and other types of moving equipment.
Whether you need to power for a simple top running applications or a curved monorail Electrobar 8-Bar Enclosed Conductor Bar System is the solution.
Assembles easily and can be mounted either vertically or horizontally
Figure-8 Design allows you to use it interchangeably with common bottom-entry 8-bar systems
Available for 90, 110 and 350 Amp applications
Cover options available for high temperature environments
De-icing system available for low temperature applications
Collector assemblies feature: corrosion resistant pivot pins; impact-resistant, universally interchangeable
polycarbonate arms; and electrically insulated collector bodies
Single and tandem collector assemblies available for smooth, continuous contact along straight runways
or curved applications
Conductor sections are roll-formed galvanized steel in 90 and 110 amp ratings, and copper in the 350
All systems are designed to carry the specified current rating using a duty cycle of 70% (84 seconds on
and 36 seconds off)
Most items are available from stock for same day shipment.
ELECTROBAR 8-Bar Enclosed Conductor Bar System Brochure
Electrobar 8-Bar Conductor Bar System Instruction Manual 005-1044
|ELECTROBAR® Elite Conductor Bar System
Magnetek proudly offers ELECTROBAR Elite, our most advanced conductor bar system.
The collector trolley and conductors are captured inside the line element extrusion and can't be disengaged. The collector trolley is advanced
with a chain which tolerates large movements lateral to the direction of motion. The system is simple to install, with only one "stick"
to hang and align.
Lower Total System Cost - Easy to Install and Maintain
Electrobar Elite reduces installation time when compared with traditional conductor bar systems. Maintenance
requirements are minimized, providing lower installation and lifetime maintenance costs.
System components are lightweight and rigid, allowing a single person to assemble the system.
Line elements are easily slipped into the snap-in hangers, which mount with one threaded rod to the hanger
bracket. Joint covers, power feeds and end caps simply snap together over the line elements. Much of the
assembly is done by hand, using a minimum number of tools.
Line elements are connected with torque limiting bolts whose heads twist off when enough torque has been
applied. This assures proper connection of conductors with smooth transitions from section to section for the
Collector brushes are normally serviced by removing the trolley from the end of the system.The brushes are
easy to remove and put back into the trolley, allowing a rapid return to service after maintenance. The collector
assembly can only be put back into the line element in one orientation, preventing cross connecting power and
Compact design allows installation in tight spaces where other systems will not fit.
No expansion joints are required in systems under 460 feet.
Low friction collectors ease movement of workstation bridge cranes.
IP23 rated so it is finger safe and resistant to rain at up to a 60 degree angle from vertical.
Rubber dust exclusion strips are available to minimize contamination of conductors through the line element
High speed collectors available for speeds exceeding 325 fpm. High temperature line elements available for
temperatures above 55oC to 75oC.
Curved elements available with minimum 32" radius.
Ventilated line elements prevent condensation build up.
Trolley introduction gates ease maintenance of collector trolleys when three or more bridges are used on a
single crane runway.
1. Line Element
2. End-Line Power Feed
3. In-Line Power Feed
4. Joint Cover
5. End Cap
6. Sliding Hanger
7. Anchor Hanger
8. Mounting Bracket
10. Tow Bracket
ELECTROBAR Elite Conductor Bar System Brochure
Electrobar Elite Conductor Bar System Instruction Manual 005-1054
|ELECTROBAR® FS (Finger Safe) Conductor Bar System
Magnetek knows the safety and performance of your overhead material handling system are top priorities. That's why we proudly offer the
Electrobar FS Conductor Bar System for the electrification of cranes, monorails and automated storage and retrieval systems.
Conductor Bar Shape Enhances Performance
Bar profile design ensures good electrical contact between the collector shoe and conductor bar.
Wear of the conductor bar cover is minimized because the profile guides the shoe towards the center.
Potential loss of electrical contact at joints is significantly reduced.
Rigid conductor bar design minimizes deflection between hangers.
Easy to Install and Maintain
Modular, snap-in multi-pole conductor bar hangers reduce installation and maintenance time.
Compression-type anchor hangers (US Patent #6588713) eliminate field drilling.
Expansion line elements come completely pre-assembled.
Minimal system maintenance required - just periodically replace collector brush assemblies.
Systems up to 490 feet in length can be installed without expansion assemblies.
Standard 15' bar lengths mean fewer joints to purchase.
Common hangers and joint assemblies.
System design reduces installation labor costs.
Designed with Safety in Mind
Finger safe design minimizes the potential for electrical contact.
Grounding conductor bar available with green cover for ease of identification.
Available in a Variety of Configurations
Single and tandem shoe collector assemblies.
90, 110, 125, 250 and 400 Amp ratings.
Snap-in hanger kits available for 2, 3 and 4 pole applications.
Single hangers also available for special configurations.
Many collector styles available.
Can be used in horizontal or vertical mount applications.
1. Line Element
2. Joint Assembly
4. Power Feeds
5. End Cover
6. Mounting Bracket
7. Expansions (not shown)
8. Transfer Cap (not shown)
9. Collectors (not shown)
ELECTROBAR FS (Finger Safe) Conductor Bar System Brochure
Electrobar FS Conductor Bar System Instruction Manual 005-1066
100 Amp Extension Bracket Installation Instructions 120-10043
200 Amp Extension Bracket Installation Instructions 120-10044
|ELECTROBAR® HX-Bar Insulated Conductor Bar System
When you need high amperage power delivery for a heavy duty application, Magnetek's Electrobar HX-Series Enclosed Conductor Bar System
is the solution.
Electrobar HX Systems can accommodate 600 Volt AC and 250 Volt DC applications
Line elements are available to deliver 400, 700, and 1000 amps continuous current
Rated for use in environments up to 160o F ambient temperature
Aluminum alloy extruded line elements with stainless-steel lined contact surface provide better performance
and increase durability
Inverted V contact surface for positive tracking of collector shoes
ELECTROBAR HX-Bar Insulated Conductor Bar System Brochure
Electrobar HX Conductor Bar System Installation Instructions 000-9901