Web orders only - FREE shipping via UPS Ground (continental US only, motor freight excluded)
 
 
 
 
 
  BRAKE PRODUCTS
61,816 part numbers: Brake Wheels & Discontinued Brake Parts
  GEMCO
14,259 part numbers: Motion Control Products
 
  GLEASON
17,982 part numbers: Cable & Hose Management Systems
  AERO-MOTIVE
2,534 part numbers: Cable & Hose Management Systems
  CUTLER-HAMMER
6,348 part numbers: Electrical Control Products
 
 
 
 
 
  STEARNS
6,674 part numbers: Motor Mounted Brakes
  HUBBELL
8,545 part numbers: Electrical Control Products
  SUPERBOLT
103 part numbers: Fastening Solutions
  TELEMOTIVE
2,507 part numbers: Radio Remote Control
  RENOLD
405 part numbers: Mechanical Power Transmission Products
 
 

Aero-Motive Direct
Amazon Store

 
68 part numbers
 

Brake Products
Amazon Store

 
465 part numbers
 
COVID-19 SUPPORT
Brake Products is open with a smaller staff and less hours as a Critical Supplier to the Steel Industry. We are doing our part to mitigate the spread of the virus by complying with the requests by our Federal and State Governments.
 
BPI has inventory and is ready to assist you with your required products and parts. Our priority is to keep U.S. Manufacturing running without delay. Call us at (440) 543-7962 or email us at sales@brakeproducts.com
 
We are ready to help.
 
John Hooper, President
Brake Products, Inc.
 
Web: www.TelemotiveDirect.com Email: sales@TelemotiveDirect.com Phone: (888) 861-8777
 
Collision Avoidance Systems
LaserGuardTM 2
 
Magnetek's new LaserGuard2 enhances the performance of overhead material handling systems by preventing crane-to-crane or crane-to-end-stop collisions. Avoiding collisions results in reduced maintenance costs and increased operator safety. This system is ideal for use with all types of cranes with adjustable frequency drives, soft starters, or contactor controls.
 
The next generation LaserGuard2 is the most technologically advanced system available, using self-monitoring optical lasers to check your crane�s position. Its multi-distance detection feature is flexible enough to manage crane-to-crane and wall-to-crane operation.
 
Features:
 
  •  Eight inch to 150 foot detection range*
  •  IP65 rating for indoor and outdoor** applications
  •  85-264 VAC and 120-370 VDC, or 9-36 VDC (optional)
  •  Pushbutton programming that makes the system easy to use
  •  Can be adjusted for three individual contact closures within the detection range
  •  Visible light that provides easier alignment and quick set-up
 
System Includes:
 
  •  10 meter sensor cable standard (additional lengths available upon request)
  •  Laser support unit
  •  2 x 2 ft. reflector
  •  Laser
  •  Mounting bracket
 
*Runway length may be greater than detection range
**System may not operate properly in direct sunlight or inclement weather conditions
 
 
Documentation:
 
  •  Collision Avoidance Brochure
  •  LaserGuard2 Systems Replacement Guide
  •  LaserGuard2 Collision Avoidance System Application Bulletin
  •  LaserGuard2 Collision Avoidance System Addendum 147-20054
  •  LaserGuard2 Collision Avoidance System Instruction Manual 147-20004
  •  LaserGuard2 Collision Avoidance System Retrofit Addendum 147-20066
 
ReFlx® 45
 
Magnetek's new ReFlx 45 enhances the performance of overhead material handling systems by preventing crane-to-crane or crane-to-end-stop collisions. Avoiding collisions results in reduced maintenance costs and increased operator safety. This system is ideal for use with all types of cranes with adjustable frequency drives, soft starters, or contactor controls.
 
The ReFlx 45 is a cost-effective system, ideal for a single stop action. All electronic components are built into one housing, enabling easy installation on overhead material handling applications.
 
Features:
 
  •  3-45 foot detection range*
  •  IP67 rating for indoor and outdoor** applications
  •  24-240 VAC, 12-240 VDC
  •  LEDs indicating power and range for simple set-up and troubleshooting
 
System Includes:
 
  •  Sensor
  •  Sensor bracket
  •  2 X 2 ft. adhesive reflector standard for convenient placement
  •  Optional DIN rail for mounting that makes retrofit installations in harsh environments effortless
  •  Cable available in custom lengths (one foot increments)
 
*Runway length may be greater than detection range
**System may not operate properly in direct sunlight or inclement weather conditions
 
Documentation:
 
  •  Collision Avoidance Brochure
  •  ReFlx 45 Collision Avoidance System Application Bulletin
  •  ReFlx 45 Collision Avoidance System Instruction Manual 147-20011
 
ReFlx® 120
 
Magnetek's ReFlx 120 and 120 "Plus" Systems keep your overhead material handling system up and running safely by providing the ideal solution for collision avoidance.
 
The ReFlx 120 System features a two-channel infrared sensor, which can be adjusted to give separate outputs for each channel at distances from 20 to 120 feet. The most commonly wired configuration is the use of one channel to provide the primary stop command to the motion control, while the second channel is used as a redundant stop command.
 
The system includes:
  •  Two-Channel Sensor
  •  Controller
  •  Diamond Reflective Target (2 feet x 2 feet)
 
REFLX System Operation:
The ReFlx sensors consist of a transmitter and receiver(s). The infrared signal is transmitted at the target or object. The reflected signal from the target or object is sensed by the receiver. The information is processed and the relay opens, providing a slow down or stop of the bridge control.
 
Documentation:
 
  •  ReFlx 120 Brochure
  •  ReFlx 120/120 "Plus" Collision Avoidance System Instruction Manual 005-1084
  •  Collision Avoidance Product Comparison
 
ReFlx® 120 "Plus"
 
Magnetek's ReFlx 120 and 120 "Plus" Systems keep your overhead material handling system up and running safely by providing the ideal solution for collision avoidance.
 
To provide an extra measure of safety to your collision avoidance system, the ReFlx 120 "Plus" includes all the components of the ReFlx 120 system, plus the addition of a second, shorter range, sensor. The first sensor, which has two channels, is most commonly wired to use the first channel as a "slow down" command or warning signal, and the second channel as a primary stop command. The second sensor has a single channel, with a range of 1.5 to 20 feet, and is most commonly used as a redundant stop command. The second sensor does not require a reflective target to be utilized.
 
The system includes:
  •  Two-Channel Sensor
  •  Single-Channel Sensor
  •  Controller
  •  Diamond Reflective Target (2 feet x 2 feet)
 
REFLX System Operation
The ReFlx sensors consist of a transmitter and receiver(s). The infrared signal is transmitted at the target or object. The reflected signal from the target or object is sensed by the receiver. The information is processed and the relay opens, providing a slow down or stop of the bridge control.
 
Documentation:
 
  •  ReFlx 120 "Plus" Brochure
  •  ReFlx 120/120 "Plus" Collision Avoidance System Instruction Manual 005-1084
  •  Collision Avoidance Product Comparison
 
Collision Avoidance Systems
No Part
Number
Description Image Stock
Qty
Price
Each
Qty
Ord'd
Update
Cart
1 MAG-#R-CG0 Cable Grip and Locking Nut–1/2’’ NPT (Used for Input Power) 
MAG-#R-CG0
- 0 $8.50
2 MAG-LG2-CABLE-10M Unshielded 10m cable - 0 $40.00
3 MAG-LG2-CABLE-25M Shielded 25m cable - 0 $180.00
4 MAG-LG2-CABLE-40M Shielded 40m cable - 0 $285.00
5 MAG-LG2-CABLE-75M Shielded 75m cable - 0 $560.00
6 MAG-LG2-CONTROL Control BoarControl Board (sub-component of LSU)d (sub-component of LSU) - 0 $475.00
7 MAG-LG2-H-4 Magnetek LASERGUARD2 SYSTEM 
Model LG2-H-4 
Collision Avoidance System 
LaserGuard 2 System designed for Indoor Service 
On AC or DC Powered Cranes, 85 to 264 Volt AC or 120 to 370 Volt DC 
The Contact are 10 AMP 270 Volt AC /27 Volt DC 
The Range is 8 Inch to 150 Feet 
The system provides 3 contacts for controlled slowdown 
It also provides a fault relay to indicate problems or to cut out power to the crane 
The sensor and control are mounted / rated for a NEMA 4 Application 
Including: 
LG2-Control Board 
MDR-40-12, Power Supply 
LG2-Head, Laser Class 1 
Laser Support Unit 
LG2-Cable-10M. Standard Unshielded 
2 X 2 Foot Reflector 
Reflector Mounting Bracket 
Ships in 1 Week 
Dated 12-19
- 0 $2,250.00
8 MAG-LG2-H-4-25 Designed for indoor service on AC or DC powered cranes (85-264 VAC or 120-370 VDC). The contacts are 10 amps, 270VAC/27VDC, and the range is 8in-150ft. The system provides 3 contacts for controlled slowdown. It also provides a fault relay to indicate problems or to cut out power to the crane. The system includes: laser, bracket, enclosed Laser Support Unit, reflector, and a 25m cable. - 0 $2,310.00
9 MAG-LG2-H-4-40 Designed for indoor service on AC or DC powered cranes (85-264 VAC or 120-370 VDC). The contacts are 10 amps, 270VAC/27VDC, and the range is 8in-150ft. The system provides 3 contacts for controlled slowdown. It also provides a fault relay to indicate problems or to cut out power to the crane. The system includes: laser, bracket, enclosed Laser Support Unit, reflector, and a 40m cable. - 0 $2,475.00
10 MAG-LG2-H-4-75 Designed for indoor service on AC or DC powered cranes (85-264 VAC or 120-370 VDC). The contacts are 10 amps, 270VAC/27VDC, and the range is 8in-150ft. The system provides 3 contacts for controlled slowdown. It also provides a fault relay to indicate problems or to cut out power to the crane. The system includes: laser, bracket, enclosed Laser Support Unit, reflector, and a 75m cable. - 0 $2,725.00
11 MAG-LG2-H-4-IR Designed for indoor service DC powered cranes (120-370 VDC). Same as LG2-H-4, but includes intermediate relays to switch 250 VDC with 24 VDC coils. The range is 8in-150ft. The system provides 3 contacts for controlled slowdown. It also provides a fault relay to indicate problems or to cut out power to the crane. The system includes: laser, bracket, enclosed Laser Support Unit, reflector, and a 10m cable. - 0 $6,286.00
12 MAG-LG2-H-4X Magnetek LASERGUARD2 Collision Avoidance System 
Model LG2-H-X 
LaserGuard 2 System Designed for Indoor Service 
On AC or DC Powered Cranes, 85 to 264 Volt AC or 120 to 370 Volt DC 
The Contacts are 10 AMP 270 Volt AC / 27 Volt DC 
The Adjustable Range is 8 Inch to 150 Feet 
The system provides 3 Contacts for Controlled Deceleration 
It also provides a Fault Relay to Indicate Problems or to Cut Off Power to the crane 
The Sensor and Controls IP68, are Mounted in a NEMA 4X Stainless Steel Enclosures 
Pushbutton Programming & a Visible Red Light for Easy Alignment 
Includes, Laser Support Unit, 2 X 2 Foot Reflector 
Laser, Mounting Bracket, Cable & Installation / User Manual  
Ships in 1 Week, WI 53051 
Dated 12-19
- 0 $3,795.00
13 MAG-LG2-HEAD Laser head only. - 0 $1,550.00
14 MAG-LG2-HEAD-K Laser head with mounting bracket. - 0 $1,375.00
15 MAG-LG2-H-LSU Laser Support Unit (LSU) designed for AC or DC powered cranes (85-264VAC or 120-370VDC). The contacts are rated at 10A 270VAC/27VDC. Includes power supply and control board in a NEMA 4 enclosure. - 0 $1,175.00
16 MAG-LG2-L-4 Magnetek Telemotive Laser Guard 2 Collision Avoidance System 2/15 - 0 $2,495.00
17 MAG-LG2-L-4-25 Designed for indoor service DC powered cranes (9-36 VDC). The contacts are 10 amps, 270VAC/27VDC, and the range is 8in-150ft. The system provides 3 contacts for controlled slowdown. It also provides a fault relay to indicate problems or to cut out power to the crane. The system includes: laser, bracket, enclosed Laser Support Unit, reflector, and a 25m cable. - 0 $3,050.00
18 MAG-LG2-L-4-40 Designed for indoor service DC powered cranes (9-36 VDC). The contacts are 10 amps, 270VAC/27VDC, and the range is 8in-150ft. The system provides 3 contacts for controlled slowdown. It also provides a fault relay to indicate problems or to cut out power to the crane. The system includes: laser, bracket, enclosed Laser Support Unit, reflector, and a 40m cable. - 0 $3,125.00
19 MAG-LG2-L-4-75 Designed for indoor service DC powered cranes (9-36 VDC). The contacts are 10 amps, 270VAC/27VDC, and the range is 8in-150ft. The system provides 3 contacts for controlled slowdown. It also provides a fault relay to indicate problems or to cut out power to the crane. The system includes: laser, bracket, enclosed Laser Support Unit, reflector, and a 75m cable. - 0 $33.50
20 MAG-LG2-L-4X MagnetekTelemotive Laser Guard 2 Collision Avoidance System - 0 $3,995.00
21 MAG-LGM-4X Magnetek LaserGuard Mini System 
Part LGM-4X 
LGM4X 
TWO, Distance Set Points, Slowdown - Stop 
TWO, Relays, 6 AMP 250 Volt AC - 24 Volt DC  
8 Inch to 164 Foot Range 
Input Voltage 
85-264 Volt AC or 
120-370 Volt DC 
Includes: 
Laser & Receiver Panel in a NEMA 4X Enclosure 
Reflector 
Ships in 3 Days, WI 53051 
Dated 03-2021
- 0 $1,350.00
22 MAG-LGM-OPEN-H-10 LaserGuard Mini System, 85-264VAC or 120-370VDC, 8in-164ft range. 2 distance set points (slowdown/stop) and (2) 6A 250VAC/24VDC relays. Includes laser, hinged bracket, open panel, 10m cable, & reflector. - 0 $1,175.00
23 MAG-LGM-OPEN-H-25 LaserGuard Mini System, 85-264VAC or 120-370VDC, 8in-164ft range. 2 distance set points (slowdown/stop) and (2) 6A 250VAC/24VDC relays. Includes laser, hinged bracket, open panel, 25m cable, & reflector. - 0 $12.75
24 MAG-LGM-OPEN-H-40 LaserGuard Mini System, 85-264VAC or 120-3LaserGuard Mini System, 85-264VAC or 120-370VDC, 8in-164ft range. 2 distance set points (slowdown/stop) and (2) 6A 250VAC/24VDC relays. Includes laser, hinged bracket, open panel, 40m cable, & reflector.70VDC, 8in-164ft range. 2 distance set points (slowdown/stop) and (2) 6A 250VAC/24VDC relays. Includes laser, hinged bracket, open panel, 40m cable, & reflector. - 0 $1,425.00
25 MAG-LGM-OPEN-H-75 LaserGuard Mini System, 85-264VA LaserGuard Mini System, 85-264VAC or 120-370VDC, 8in-164ft range. 2 distance set points (slowdown/stop) and (2) 6A 250VAC/24VDC relays. Includes laser, hinged bracket, open panel, 75m cable, & reflector.C or 120-370VDC, 8in-164ft range. 2 distance set points (slowdown/stop) and (2) 6A 250VAC/24VDC relays. Includes laser, hinged bracket, open panel, 75m cable, & reflector. - 0 $1,575.00
26 MAG-LGM-OPEN-R-10 Magnetek LaserGuard Mini System 
Part LGM-OPEN-R-10 
LGMOPENR10 
TWO, Distance Set Points, Slowdown - Stop 
TWO, Relays, 6 AMP 250 Volt AC - 24 Volt DC  
8 Inch to 164 Foot Range 
Input Voltage 
85-264 Volt AC or 
120-370 Volt DC 
Includes: 
Laser Head with a Rigid Bracket 
Open Panel for installation into existing enclosure 
10 Foot Connection Cable 
& a Reflector 
Ships in 3 Days, WI 53051 
Dated 03-2021
- 0 $1,100.00
27 MAG-LGM-OPEN-R-25 Magnetek LaserGuard Mini System 
Part LGM-OPEN-R-25 
LGMOPENR25 
TWO, Distance Set Points, Slowdown - Stop 
TWO, Relays, 6 AMP 250 Volt AC - 24 Volt DC  
8 Inch to 164 Foot Range 
Input Voltage 
85-264 Volt AC or 
120-370 Volt DC 
Includes: 
Laser Head with a Rigid Bracket 
Open Panel for installation into existing enclosure 
25 Foot Connection Cable 
& a Reflector 
Ships in 3 Days, WI 53051 
Dated 03-2021
- 0 $1,200.00
28 MAG-LGM-OPEN-R-40 Magnetek LaserGuard Mini System 
Part LGM-OPEN-R-40 
LGMOPENR40 
TWO, Distance Set Points, Slowdown - Stop 
TWO, Relays, 6 AMP 250 Volt AC - 24 Volt DC  
8 Inch to 164 Foot Range 
Input Voltage 
85-264 Volt AC or 
120-370 Volt DC 
Includes: 
Laser Head with a Rigid Bracket 
Open Panel for installation into existing enclosure 
40 Foot Connection Cable 
& a Reflector 
Ships in 3 Days, WI 53051 
Dated 03-2021
- 0 $1,350.00
29 MAG-LGM-OPEN-R-75 LaserGuaLaserGuard Mini System, 85-264VAC or 120-370VDC, 8in-164ft range. 2 distance set points (slowdown/stop) and (2) 6A d Mini System, 85-264VAC or 120-370VDC, 8in-164ft range. 2 distance set points (slowdown/stop) and (2) 6A - 0 $1,500.00
30 MAG-MDR-40-12 MagnetekTelemotive Power Supply for Laser Guard - 0 $88.00
31 MAG-REFLX120 Magnetek ReFlx 120 
Part REFLX120 
The ReFlx 120 system is most commonly used in applications requiring only a stop command. 
The two channels in the sensor will be used as a primary stop and a redundant stop. 
Ships in 3 Days, WI 53051 
Dated 03-2021 
(12LBS) H 8" L 24" W 24" Box
- 0 $1,899.00
32 MAG-REFLX120-2S Magnetek ReFlx Sensor 
Part REFLX120-2S 
Two-Channel Sensor 
With Mounting Bracket and Cable 
Ships in 3 Days, WI 53051 
Dated 03-2021 
(3LBS) H 4" L 6" W 4" Box
- 0 $1,550.00
33 MAG-REFLX120-CARD Magnetek Circuit Board 
Part ReFlx120-CARD 
Controller Circuit Board 
For ReFlx 120 and 120 "Plus" Systems 
Ships in 3 Days, WI 53051 
Dated 03-2021
- 0 $400.00
34 MAG-REFLX45 18-3 CBL Magnetek Reflx Cable 
Part ReFlx45 18/3 CBL 
Cable 
ReFlx 45 Parts 
3 Conductor 
18 Gauge Cable 
Specify Length 
Sold in 1 Foot Increments 
Price is per Foot 
Ships in 3 Days, WI 53050 
Dated 03-14-2021
- 0 $1.61
35 MAG-REFLX45-AD Magnetek Reflx Collision Avoidance System 
Part REFLX45-AD 
aka 147-20028 
The ReFlx 45 system is used in indoor applications requiring only a single stop 
The input voltage is rated at 24-240 Volt AC or 12-240 Volt DC 
With an Operating Range of approximately 3 to 45 Feet 
The system includes: 
Sensor 
Standard Mounting Bracket 
Adhesive Backed Reflector 
NOTE: ReFlx 45 Systems are not supplied with cable, an available option 
Ships in 3 Day, WI 53050 
(12LBS) H 4" L 26 W 12" Box
- 1 $249.00
36 MAG-REFLX45-ADH Magnetek Reflx Collision Avoidance Systems, ReFlx 45 Systems, The ReFlx 45 system is used in indoor applications requiring only a single stop. The input voltage is rated at 24-240VAC or 12-240VDC with an operating range of approximately 3 to 45 ft. The system includes: sensor, hinged mounting bracket, and adhesive backed reflector. NOTE: ReFlx 45 Systems aren't supplied with cable. If needed, please select a desired cable length in the Components section below. - 0 $299.00
37 MAG-REFLX45-DIN Magnetek Reflx Collision Avoidance Systems, ReFlx 45 Systems, The ReFlx 45 system is used in indoor applications requiring only a single stop. The input voltage is rated at 24-240VAC or 12-240VDC with an operating range of approximately 3 to 45 ft. The system includes: sensor, standard mounting bracket, and rail mounted reflector. NOTE: ReFlx 45 Systems aren't supplied with cable. If needed, please select a desired cable length in the Components section below. - 0 $299.00
38 MAG-REFLX45-DINH Magnetek Reflx Collision Avoidance Systems, ReFlx 45 Systems, The ReFlx 45 system is used in indoor applications requiring only a single stop. The input voltage is rated at 24-240VAC or 12-240VDC with an operating range of approximately 3 to 45 ft. The system includes: sensor, hinged mounting bracket, and rail mounted reflector. NOTE: ReFlx 45 Systems aren't supplied with cable. If needed, please select a desired cable length in the Components section below. - 0 $349.00
39 MAG-REFLX-CG Magnetek ReFlx Cable Grip 
3/8 NPT 
For use with the Sensor Cable 
Dated 03-2021
- 0 $11.50
40 MAG-REFLX-LN Magnetek ReFlx Cable Grip Locking Nut 
3/8 NPT 
For use with the Sensor Cable 
Dated 03-2021
- 0 $5.75
41 MAG-REFLX-REFLECTOR-AD Magnetek Reflector ReFlx 
Part ReFlx-Reflector-AD 
Reflector 
Adhesive 24"x24" Inch Std 
Ships in 3 Days, WI 53051 
Dated 03-14-2021 
(2LBS) H 4" L 14 W 4" Box
- 0 $50.00
42 MAG-REFLX-REFLECTOR-DIN Magnetek Reflector ReFlx 
Part ReFlx-Reflector 
ReFlx 45 Parts 
Reflector DIN-Mount  
24 X 24 Inch  
Ships in 5 Days WI 53050 
Dated 03-2021 
(8LBS) H 4" L 26 W 4" Box
- 0 $105.00
43 MAG-RIGID-BRACKET Rigid mounting bracket (standard) - 0 $25.00
Secure Online Order

 
Secure Online Order
 
2,507 part numbers available for
online order
 
Shopping Cart
Empty
Checkout is secure
 
All products are covered by a $1,000,000 liability insurance:
Click to view the Certificate

Products Available From Stock
Free shipping via UPS Ground (continental US only, motor freight excluded)
 
Web Site Features
 
Part Number Lookup
 
Enter at least three characters of a Telemotive, Magnetek or Mondel part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
 
Part Number:

 
Search scope:
This web site only
 
Formal PDF Quotation
 
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
 
Your shopping cart is kept intact and you can still check out at a later time.
AC Motor Control

AC Motor Control
 
Adjustable Frequency Crane Controls are the Next Generation of Crane Performance:
 
   - IMPULSE®•G+ Series 4
   - IMPULSE®•VG+ Series 4
   - IMPULSE®•G+ Mini
   - IMPULSE®•T
Radio Remote Control

Radio Remote Control
 
Transmitters-Handheld Style:
  - EnrangeTM Flex EX Series
  - Flex Pro Series Radio Control
  - Telemotive Flex VUE®
  - Telemotive telePendantTM
  - Telemotive telePilotTM
  - Telemotive Pendant Style
Transmitters-Bellybox Style:
  - Telemotive MLTXTM, MLTX2TM
  - Telemotive SLTXTM, XLTXTM
  - Telemotive® MBT
Receivers:
  - EnrangeTM CAN-4 Receiver
  - EnrangeTM CAN-6 Receiver
  - EnrangeTM Flex M Receiver
  - Telemotive 30R Receiver
  - Telemotive 18K Receiver
  - Telemotive inteleSmart Receiver
 
Brake Products

Brake Products
 
Brake Products:
  - 200S Industrial Shoe Brakes
  - 300M AIST Mill Duty Shoe Brakes
  - Heavy-Duty Disc 400D
  - Motor Mounted Brakes
  - Vertical Brakes
  - Hy-Thrust Actuators
  - Braketronic® Controller
  - Brake Rectifiers
  - Wheels, Couplings, Enclosures
Pendant Pushbutton Stations

Pendant Pushbutton Stations
 
Pendant Pushbutton Stations:
  - SBI Pendant Pushbutton
  - SBP® Pendant Pushbutton
  - SBP2® Pendant Pushbutton
Cable and Festoon Systems

Cable and Festoon Systems
 
Cable & Festoon Systems:
  - C-Track Festoon
  - Heavy-Duty Aluminum Festoon
  - Heavy-Duty I-Beam Festoon
  - Marine Terminal I-Beam Festoon
  - Mill Duty I-Beam Festoon
  - Plug & Play Festoon Hardware
  - Flat Festoon & Round Pendant
    Cable
Conductor Bar Systems

Conductor Bar Systems
 
Conductor Bar Systems:
  - FABA® 100 Conductor Rail System
  - ELECTROBAR® 8-Bar Enclosed
    Conductor Bar System
  - ELECTROBAR® Elite Conductor
    Bar System
  - ELECTROBAR® FS (Finger Safe)
    Conductor Bar System
  - ELECTROBAR® HX-Bar Insulated
    Conductor Bar
 
Collision Avoidance Systems

Collision Avoidance Systems
 
Collision Avoidance:
  - LaserGuardTM
  - ReFlx® 120
  - ReFlx® 120 "Plus"
Replacement Transmitters, Parts

Replacement Transmitters & Parts
 
Replacement:
  - Transmitters
  - Switches
  - Other Parts
Batteries & Chargers

Replacement Batteries & Chargers
 
Replacement Batteries & Chargers:
  - BT107-0
  - BT108-0
  - BT115-0
  - BT650-0
  - E10670-2
  - Other parts & battery types
DC Motor and Magnet Control

DC Motor and Magnet Control
 
Digital DC Drives:
    - OmniPulseTM DDC DC Drive
    - OmniPulseTM DSD DC Control
 
Magnet Controllers:
    - MagnePulseTM Digital Magnet
      Control
 
This web site is owned and operated by Brake Products, Inc.
Brake Products, Inc.   16751 Hilltop Park Place
  Chagrin Falls, Ohio 44023
  Phone: (440) 543-7962
  Fax:     (440) 543-7963
  Web:   www.brakeproducts.com
  Email: sales@brakeproducts.com
  Federal ID #: 34-1473351
  CAGE Code: 1QTP8
  DUNS# 14-748-2392
  Download: Form W-9
Supplier of Industrial Brake Parts Since 1985