Radio Remote Control Products |
EnrangeTM Flex EX Series |
The Enrange Flex EX series of radio remote controls provides a cost-effective solution to the restrictive use of hardwired pendants.
These durable and rugged radios are ideal for use in material handling, overhead crane, mobile hydraulic and industrial applications. Flexible
and reliable, these systems are designed to be ergonomic and lightweight, and are available in 4, 6, 8 and 12 button style options to meet all
your application needs.
Flexible and Efficient Performance
Advanced microprocessor controls with 32 bit CRC and Hamming Code provide ultra-fast, safe, precise and
error-free encoding and decoding
Unique I-CHIP design allows information and settings to be transferred between transmitters,
increasing flexibility and minimizing spare parts inventory.
Flex EX is equipped with more than 200 programmable functions to suit all types of applications.
A wide variety of accessories is available to provide additional protection and flexibility, including protective
rubber transmitter boots, padded nylon transmitter case, retractable belt clip, and horn kit
Strong and Reliable
Reliable pushbuttons feature gold-plated contacts and are rated for more than one million press cycles. The
defined snap-action steps provide positive tactile feedback even while wearing gloves.
Durable enclosures are made from industrial-strength nylon and fiberglass composite materials.
Two "AA" alkaline batteries provide more than 100 hours of operation. A rechargeable battery kit with LED
indicators is also available.
Secure and Dependable Communications
Advanced synthesized RF controls with 62 user-programmable channels add flexibility to frequency
management in the field.
Each Flex EX system has over one million unique identification codes (20 Bit) and never repeats.
Specialty Models
Flex EX radios are available with special operational functions to provide even more control options.
A/B Selector Switch (AB)
A three-position selector switch allows one operator to switch operation between two trolley/hoists (A, B, or Both) that are located on a single
bridge. The operator can easily identify which trolley hoist is active on the crane by the position of the selector switch.
Tandem Operation (T)
This system allows two operators to control two bridge cranes or trolley/hoists independently or simultaneously with the three position selector
switch. One operator can maximize the capabilities and lifting power of two bridge cranes or both users can operate each bridge crane
independently. (Available on 8- and 12-button models)
Receiver Select Operation (RS)
The system allows one operator to select multiple receiver units at one time, so one operator can control up to 2 bridges and 4 trolley/hoists
simultaneously or independently. This simplifies installation by eliminating control festooning between the bridge and trolley/hoists and
freeing up the trolley/hoist to run from one bridge to the next. (Available on 8- and 12-button models)
Flex EX Receivers
Flex EX receivers were designed with field installation and serviceability in mind. Receivers come prewired with 6' of cable and mounting
hardware allowing fast installation. Onboard diagnostic and output LEDs provide system status information useful when installing and
troubleshooting. All components are easily accessible and field replaceable. The IP66 rated fully sealed receiver enclosures provide you with
confidence and protection in the harshest indoor or outdoor environments.
These receivers are also compatible with Flex EX transmitters: CAN-6, Flex M, 30R
Documentation
Enrange Flex EX Series Brochure
Enrange Flex 4EX System Radio Control Equipment Manual 0-TC-FLEX4E
Enrange Flex 4EX EU Radio Control Equipment Instruction Manual 191-00193-0001
Enrange Flex 6EX System Radio Control Equipment 0-FLEX-6EX-ME
Enrange Flex 6EX EU Radio Control Equipment Instruction Manual
Enrange Flex 6EX-Tandem Radio Control Equipment Instruction Manual 198-00245-3000
Enrange Flex 8EX System Radio Control Equipment 0-TC-FLEX8E
Enrange Flex 8EX EU Radio Control Equipment Instruction Manual 191-00193-0003
Enrange Flex 8EX A/B System Radio Control Equipment 0-FLEX-8EX-ABME
Enrange Flex 8EX-Tandem Radio Control Equipment Instruction Manual 198-00245-1000
Enrange Flex 12EX System Radio Control Equipment 0-TC-FLEX12E
Enrange Flex 12EX EU Radio Control Equipment Instruction Manual
Enrange Flex 12EX System Radio Control Equipment-Canada 0-TC-FLEX12-CSAE
Enrange Flex 12EX A/B System Radio Control Equipment 0-FLEX-12EXABME
Enrange Flex 12EX-Tandem Radio Control Equipment Instruction Manual 198-00245-2000
Enrange Flex 8RS System Radio Control Equipment Instruction Manual 0-FLEX-8RS-ME
Enrange Flex 12RS System Radio Control Equipment Instruction Manual 0-FLEX-12RS-ME
Enrange Flex System Quick Reference Guide 198-00307-1000
Flex I-Chip Remote Crane Controls 198-50014
Telemotive General Battery & Charger Precautions
|
![](/Products/Radio%20Remote%20Control%20Products/images/EnrangeFlexEXSeries.jpg)
Flex EX 4/6 Receiver
![](/Products/Radio%20Remote%20Control%20Products/images/FlexEX4-6Receiver.jpg)
Flex EX 8/12 Receiver
![](/Products/Radio%20Remote%20Control%20Products/images/FlexEX8-12Receiver.jpg)
|
Flex Pro Series Radio Control Systems |
Our ergonomically styled Flex Pro series incorporates the latest in proportional control technology in a lightweight, comfortably contoured,
yet durable case. It's available with several options to meet the needs of a variety of applications and industries.
Comfort and Style in One Package
Ergonomically designed contoured case with available rubber jacket makes it comfortable for the user
Designed to be compact and lightweight to prevent operator fatigue
Versatile Yet Precise Operations
Choose 8 or 12 proportional button configurations with precise control for smooth operation
Adjustable speed control - four mode settings (25%, 50%, 75% and 100% output) provide precise control
of machine movement
Buttons can be configured as proportional, on/off, or a combination of both and include a variety of standard
labels
Revolutionary I-CHIP module makes this a universal transmitter that can be programmed in the field
Flexible and Adaptable to Your Specific Requirements
Rugged, tough nylon housing is made to withstand shock; protective cases and accessories available for
harsh environments
Rated NEMA 4 (IP66); sealed to withstand harsh, industrial environments
Informative LEDs provide diagnostic and system status
Designed to minimize power consumption, providing one of the longest life batteries in the industry today -
rechargeable NiMH battery pack available
Custom labeling available
Customized, Engineered Systems
We'll build your system to your specifications - with our Flex M receiver, it's completely customizable.
Flex M Receiver Features
Full modular design
Part 15 433MHz
Synthesized RF, 32 channels
Available in 16, 24, 32, 40, 48, and 56 output configurations
Stepped control (2, 3, or 5) interfaces available
Stepless (0-5 Vdc, 0-10 Vdc, 0-+/-10 Vdc) interfaces available
Radio Drive Serial Interface (RDSI) Module
The RDSI module is designed to communicate via a serial interface to directly control Magnetek's IMPULSE G+/VG+ Series 4 and IMPULSE G+ Mini
Adjustable Frequency Crane Controls (consult factory for compatibility if you have an existing RDSI setup with a Series 2 drive). The Flex Pro
provides one-way communication, but contact factory for information on two-way feedback radio combinations available.
The RDSI module:
Automatically detects drive types
Eliminates the need for drive contactors
Reduces system costs by eliminating relay cards, excessive wiring and labor
Documentation
Flex Pro Crane Brochure
Enrange Flex Pro Transmitter 198-50003
Enrange Flex Pro Tethered Transmitter Instruction Manual 198-00132
Enrange Flex Pro Flex M Pre-Engineered Radio Control System Manual 191-00195-1200
Flex I-Chip Remote Crane Controls 198-50014
Telemotive General Battery & Charger Precautions
|
![](/Products/Radio%20Remote%20Control%20Products/images/FlexProSeries.jpg)
|
Telemotive Flex VUE® |
Magnetek's innovative new Flex VUE combines a graphic display with stepless or two-step technology in a lightweight, comfortably contoured
handheld transmitter. It's available with several options to meet the needs of a variety of applications and industries.
Superior Communication and Convenience
High resolution color display keeps the operator informed of system status and diagnostics at all times,
including battery life, signal strength, and warning symbols
Quickly and easily configure the transmitter right through the display menu
Available two-way RF for applications requiring feedback of machine parameters, alarms, and command
confirmation
Frequency options include 400MHz and 2.4GHz
Versatility Combines with Precise Control
Choose 4, 8 or 12 stepless or two-step technology button configurations with accurate and smooth operation
Adjustable speed control - four mode settings (25%, 50%, 75% and 100% output) provide exact control
of machine movement
Buttons can be configured as proportional, on/off, or a combination of both and include a variety of standard
labels
Configure the Flex VUE on a PC with the optional Radio Control Programmer
Easily upload new programming in the field with USB connection
Durable and Reliable
Rugged, super tough nylon housing is made to withstand shock, water, heat, and harsh environments
Rated NEMA 4 (IP66), sealed to withstand harsh, industrial environments
Designed to minimize power consumption, providing one of the longest life batteries in the industry today
Custom labeling, protective cases and accessories available
Comfort and Style in One Package
Ergonomically designed contoured case makes it comfortable for the user
Designed to be compact and lightweight to prevent operator fatigue
One-handed operation frees the operator to assist in other tasks
Radio Drive Serial Interface (RDSI) Option
The RDSI module is designed to communicate via a serial interface to directly control Magnetek's IMPULSE G+ Series 4 and VG+ Series 4,
IMPULSE G+ Series 3 and VG+ Series 3 and IMPULSE G+ Mini Adjustable Frequency Crane Controls (consult factory for compatibility if you
have an existing RDSI setup with a Series 2 drive). RDSI provides users with diagnostic and troubleshooting information on the ground
so there is no need to get up on the crane.
Automatically detects drive types
Eliminates the need for drive contactors
Provides feedback parameters directly from the drive, including Drive Status, Output Frequency, Output
Voltage, Output Current, Output Power, and Torque Reference
Reduces system costs by eliminating relay cards, excessive wiring and labor
We'll build your system to your specifications-with our Flex M receiver, it's completely customizable.
Documentation
Flex VUE Crane and Hoist Brochure
Flex VUE Transmitter Manual 198-80200-0001
|
![](/Products/Radio%20Remote%20Control%20Products/images/TelemotiveFlexVUE.jpg)
|
Telemotive Flex Mini |
The Latest Control Technology in the Palm of Your Hand
Magnetek's Flex Mini wireless control provides a cost-effective solution to the restrictive use of hardwired pendants. Small in size, the Flex Mini fits comfortably in the palm of your hand and incorporates the latest control technology in a lightweight, yet durable case. This low cost, easy-to-install transmitter is the perfect solution for a variety of systems and industries requiring simple control operations, such as chain hoists, dip tanks, monorails, jib cranes, conveyors, and more.
COMFORT AND STYLE IN ONE PACKAGE
Designed to be compact and lightweight to prevent operator fatigue
One-handed operation frees the operator to assist in other tasks
Small enough to fit inside a shirt pocket
VERSATILE YET PRECISE OPERATIONS
8 pushbuttons configured as on/off for accurate and smooth operations
Informative LEDs provide diagnostic and system status
Advanced microprocessor controls with 32-bit CRC provide ultra-fast and safe encoding and decoding
FLEXIBLE AND ADAPTABLE TO YOUR SPECIFIC REQUIREMENTS
Rated NEMA 4 (IP66), sealed to withstand harsh industrial and outdoor environments
A variety of standard labels are included - custom labeling available
RECEIVERS
Flex Mini receivers were designed to simplify installations in the field as well as provide flexibility for easy adjustments or configurations. Onboard diagnostic and output LEDs provide useful system status information for installation and troubleshooting. All components are easily accessible and field replaceable. IP66 rated fully sealed receiver enclosures provide you with confidence and protection in the harshest indoor and outdoor environments.
Documentation
Flex Mini Manual
Flex Mini Brochure
|
![](/Products/Radio%20Remote%20Control%20Products/images/FlexMini.jpg)
|
Telemotive telePendantTM |
Lighten your load
Durability, ergonomics, maximum functionality and value are built right into every telePendant. The lightweight pendant system will meet or
exceed your expectations in radio control.
Rugged, chemically resistant transmitter case withstands shock and abusive environments
Traditional pendant-style pushbutton station switches, rated for a million plus operations, available in two- and
three-speed designs
Ergonomic, lightweight transmitter (50% lighter than its predecessor)
All Magnetek radio control products are designed to minimize power consumption, providing one of the longest
life batteries in the industry today
Electronically synthesized frequency allows for 31 operating channels - no crystals to break
Time Multiple Shared feature - four systems can share the same channel without interference
4-in-1 transmitter design supports multiple cranes via password protected access code
Compatible with Telemotive's 10K Systems
Universal transmitter design eliminates the cost and hassle of tracking and maintaining a fleet of spare
transmitters
Radio Control Programmer (RCP) and USB/IR Adapter Package Option
Allows you to program system settings and do custom output mapping from your Windows PC
Easily create and save your system configurations for future use
Set up a spare transmitter with minimal effort
Program on your PC or in standalone mode via the USB/IR Adapter
Package includes a USB drive, activation code, USB cable, and User's Guide
Our Receivers Deliver the Options You Want
Available with various numbers of outputs
Radio ready transfer switch connections reduce installation time
Optional pre-wired "pigtail" available so unit can be installed and wired quickly
Receiver design can be configured to be operated with up to eight transmitters
Internal master relay disable switch allows you to safely test the controls "live" without moving the crane
Fusing and suppression on all power and control lines - built for the harshest applications
Compact receiver design installs easily in the most confined spaces
Clear cover controller and diagnostic LEDs allow you to perform diagnostics without opening the receiver door
Available in 12 or 24 outputs
Synthesized RF - up to 31 operating channels
telePendant pre-engineered systems consist of a pendant-style transmitter and an inteleSmart receiver.
Documentation
telePendant Brochure
Telemotive General Battery & Charger Precautions
Telemotive Infrared to USB Adapter
telePendant Series Manual
|
![](/Products/Radio%20Remote%20Control%20Products/images/telePendant.jpg)
![](/Products/Radio%20Remote%20Control%20Products/images/telePendant2.jpg)
|
Telemotive telePilotTM |
It's small but thinks big.
When you think big about your remote control needs, think small. Think telePilot. Magnetek brings you the most durable handheld transmitter on
the market today.
Order telePilot pre-programmed from the factory to fit your application or customize it yourself via the optional
Radio Control Programmer (RCP) and USB/IR Adapter
Ergonomically designed lightweight transmitter
4-in-1 transmitter design support multiple cranes via a password protected access code
Extremely durable extruded aluminum transmitter housing
Available in three-motion, two-speed and three-auxiliary functions, or three-motion, two-speed one
auxiliary function and A, A+, B or B+
Unit designed with sub-voltage technology providing a much longer operating life
Switches designed with a rated life of over one million operations
telePilot is one of the most technologically advanced remote controls in the industry. Great things do come in small packages.
Radio Control Programmer (RCP) and USB/IR Adapter Package Option
Allows you to program system settings and do custom output mapping from your Windows PC
Easily create and save your system configurations for future use
Set up a spare transmitter with minimal effort
Program on your PC or in standalone mode via the USB/IR Adapter
Package includes a USB drive, activation code, USB cable, and User's Guide
Receivers Deliver Options You Want
Receivers available with various numbers of outputs
Optional pre-wired "pigtail" available so unit can be installed and wired quickly
Radio-ready transfer switch connections reduce installation time
Receiver design can be configured to be operated with up to eight transmitters
Internal master relay disable switch allows you to safely test the controls "live" without moving the crane
Fusing and suppression on all power and control lines - built for the harshest applications
Compact receiver design installs easily in the most confined spaces
Controller and diagnostic LEDs allow you to perform diagnostics without opening the receiver door
Available in 12 outputs
Synthesized RF - up to 31 operating channels
Documentation
telePilot Brochure
Telemotive General Battery & Charger Precautions
Telemotive Infrared to USB Adapter
Telemotive teleMotion Receiver Supplement for telePilot
Telemotive telePilot Series
Telemotive telePilot Transmitters TX12 M1 2 2R
|
![](/Products/Radio%20Remote%20Control%20Products/images/telePilot.jpg)
![](/Products/Radio%20Remote%20Control%20Products/images/telePilot2.jpg)
|
Telemotive MLTXTM |
Comfort. Durability. Flexibility. That's MLTX.
Our compact MLTX bellybox transmitter incorporates the latest polymer technology in a lightweight, comfortably contoured, yet durable case.
It�s available with many options to meet the needs of a variety of applications and industries.
Our Most Comfortable Transmitter Yet!
Ergonomically designed contoured case is more comfortable for the user
One of the lightest bellybox transmitter available today - 50% lighter than our previous transmitters
Easy to use, angled lever controls enhance operator comfort
It's No Lightweight When It Comes To Being Both Durable And Reliable
The MLTX is made of rugged, super tough nylon made to withstand shock
Rated NEMA 4 (IP66), sealed to withstand harsh, industrial environments
Synthesized frequency generation enhances reliability
Dual access code system provides peace-of-mind, as the signal only operates the intended equipment
Designed to minimize power consumption, providing one of the longest life batteries in the industry today -
rechargeable NiMH battery pack standard
Military grade auxiliary function switches
MLTX Is Designed With Versatility And Flexibility In Mind
Choose up to 7 levers or 2 Joysticks
Side mounted key switch and code plug
Choose up to 6 toggles; mushroom E-stop
Available stepless, 1, 2, 3, or 5 speeds in a non-detent lever or joystick
Backward compatible with most existing Telemotive systems
Up to 4 selectable licensed frequencies
Optional certification for use in hazardous locations requiring ISA 12.12.01 Class I and Class II, Division 2,
Group A, B, C, D, E, F and G
Customize MLTX to meet your requirements, or select a pre-engineered, off-the-shelf system.
Our standard Pre-engineered MLTX system has flexibility not found in most off-the-shelf systems. It's available with our inteleSmart receiver.
We can build your system to your specifications - with our 18K, Flex M and CAN-6 receivers, it's completely customizable.
Documentation
MLTX Brochure
Telemotive Pre-Engineered MLTX Transmitter 178-00161
Telemotive Engineered MLTX Transmitter 178-00840
Magnetek MLTX SLTX and Pendant NiMH Battery Charger Smart Charger 178-00204
Telemotive General Battery Charger Precautions TC10723-0
|
![](/Products/Radio%20Remote%20Control%20Products/images/TelemotiveMLTX.jpg)
|
Telemotive MLTX2TM |
Our Telemotive MLTX2 bellybox transmitter incorporates the latest electronic technology in a lightweight, comfortably contoured, yet durable
case. It�s available with several customizable options to provide the ideal solution for a variety of applications and industries.
Comfortable and Practical Design
Ergonomically designed contoured case is more comfortable for the user
One of the lightest bellybox transmitters available today - 50% lighter than other bellybox transmitters
Easy to use, angled lever or joystick controls enhance operator comfort
Graphic display with system diagnostics including battery life, signal strength, and warning symbols
Durable and Reliable
Rugged, super-tough nylon housing is made to withstand shock
Rated NEMA 4 (IP66), sealed to withstand harsh, industrial environments
Synthesized frequency generation enhances reliability
Dual access code system provides peace-of-mind, as the signal only operates the intended equipment
Designed to minimize power consumption, providing one of the longest life batteries in the industry today -
rechargable NiMH battery pack is standard
New Versatile and Feature-Rich Options
Choose up to 6 levers or 2 joysticks
Side mounted key switch and code plug
Choose up to 12 toggles; mushroom E-stop
Available stepless, 1, 2, 3, or 5 speeds in a non-detent lever or joystick
Backward compatible with most existing Telemotive systems
Radio Control Programmer (RCP) Option
Allows you to program system settings from your Windows PC
Easily create and save your system configurations for future use
Transfer configurations among multiple radio transmitters, saving time and effort
Package includes a USB drive, activation code, USB cable, and User's Guide
Radio Drive Serial Interface (RDSI) Option
The RDSI module is designed to communicate via a serial interface to directly control Magnetek's IMPULSE G+ and IMPULSE VG+ Series 4 and
IMPULSE G+ Mini Adjustable Frequency Crane Controls (consult factory for compatibility if you have an existing RDSI setup with a Series 2
drive). It provides users with diagnostic and troubleshooting information on the ground so there is no need to get up on the crane.
Automatically detects drive types
Eliminates the need for drive contactors
Provides feedback parameters directly from the drive, including Drive Status, Output Frequency, Output
Voltage, Output Current, Output Power, and Torque Reference
Reduces system costs by eliminating relay cards, excessive wiring and labor
Documentation
Telemotive MLTX2 Brochure
Telemotive MLTX2 Transmitter 198-00144-0006
Telemotive General Battery Charger Precautions TC10723
|
![](/Products/Radio%20Remote%20Control%20Products/images/TelemotiveMLTX2.jpg)
|
Telemotive SLTXTM |
Enhance Your Productivity In The Harshest Environments
Enhance your productivity with the Telemotive SLTX wireless remote controls. This lightweight control has batteries with a long life cycle,
surface mount technology and synthesized modules to enhance flexibility in the field. Yet, this heavy-duty transmitter is ideal for even the
most abusive environment. SLTX was designed to withstand harsh environments such as steel mills and heavy manufacturing plants. It's backward
compatible and can be used for custom engineered or pre-engineered use.
New Battery End Cap Design
Makes battery easier to service, charge and replace
Charge the battery without taking the transmitter out of service
No need to open the transmitter and expose electronics
Superior battery contacts
New battery design makes the SLTX lighter weight than the previous lead acid battery system
More Environmentally Friendly Battery With Longer Life Cycle
All SLTX systems come with 2 NiMH batteries and one charger
SLTX transmitters include a NiMH battery
Select The Style That's Right For Your Application
Now available in synchronized Part 15 and Part 90
Backward compatible with all 18K and inteleSmart systems, and with most 10K and 8K systems (consult
factory)
Synthesized Modules Enhance Flexibility In The Field
Up to 4 selectable frequencies on Part 90 VHF
On Part 15 UHF, up to 31 selectable frequencies, easily changed without complicated programming devices
Surface Mount Technology
SLTX circuit boards feature SMT rather than conventional through-hole technology
Higher quality, smaller, more durable circuit boards mean enhanced reliability
SLTX Is One Of The Most Durable and Flexible radio remote control Transmitters On The Market
Proven heavy-duty lever switch style available with or without detents
Military grade auxiliary function switches
Rugged aluminum construction
Redesigned end cap made of the latest polymer technology - super tough nylon
External battery designed into the end cap
Custom engraving on engineered transmitters
Advanced Features Improve Performance And Productivity
Ideal for rough environments
Synthesized RF technology available for:
- Unlicensed (FCC Part 15) UHF - 31 selectable frequencies
- Licensed (FCC Part 90) VHF - Programmed for your application
All Telemotive radio control products are designed to minimize power consumption, providing one of the longest
life batteries in the industry today:
- Rechargeable NiMH Battery Pack
- Disposable Alkaline Battery Pack
Our standard Pre-engineered SLTX system has flexibility not found in most off-the-shelf systems and is available with our inteleSmart receiver.
Working in extreme conditions? Choose our Engineered SLTX with our 18K receiver.
Documentation
Telemotive SLTX Brochure
Telemotive Pre-Engineered SLTX Transmitter 178-00899
Telemotive Engineered SLTX Transmitter 178-00900
Telemotive SLTX BellyBox Transmitter Servicing User Manual 178-01000
Magnetek MLTX SLTX and Pendant NiMH Battery Charger Smart Charger 178-00204
Telemotive General Battery Charger Precautions TC10723-0
|
![](/Products/Radio%20Remote%20Control%20Products/images/TelemotiveSLTX.jpg)
|
Telemotive XLTXTM |
Flexible. Durable. Powerful. That's the Telemotive XLTX bellybox transmitter.
Our sophisticated Telemotive XLTX bellybox incorporates the latest wireless control technology in a lightweight, comfortably contoured, yet
durable case. It�s available with several options to meet the needs of a variety of industrial radio control applications.
Magnetek provides innovative, cost-effective, custom-engineered radio remote controls complete with crane interface controls. These radio
controls are designed to your specifications, reducing internal engineering and manufacturing costs, improving time to market, and enhancing
equipment performance. We offer complete plug-and-play remote control packages designed specifically for your overhead material handling system,
manufactured and tested on our panel assembly line.
Feature-Rich Radio Transmitter
Graphic display with system diagnostics including battery life, signal strength, and warning symbols
Available two-way RF for applications requiring feedback of crane parameters, alarms, and command
confirmation
Available high power RF for long range or harsh environments
Frequency options including 72MHz, 400MHz, 900MHz, and 2.4GHz
Rugged and Reliable
Super-tough nylon housing is made to withstand shock
Rated NEMA 4 (IP66), sealed to withstand harsh, industrial environments
Designed to minimize power consumption, providing one of the longest life batteries in the industry today
Spare battery compartment to avoid downtime
Military grade auxiliary function switches
Flexible and Adaptable to Your Specific Requirements
Choose up to 8 paddles, 4 joysticks or any combination
New detented/stepped joysticks with a variety of handle shapes to choose from, allowing the user to identify
by feel
Side mounted key switch and code plug
Numerous combinations of toggles, selector switches, and potentiometers
Available with stepless proportional controls
Tethered hardwired option
Custom engraving on transmitters per application
Radio Control Programmer (RCP) Option
Allows you to program system settings from your Windows PC
Easily create and save your system configurations for future use
Transfer configurations among multiple radio transmitters, saving time and effort
Package includes a USB drive, activation code, USB cable, and User's Guide
Packaged System Options Include:
VFDs, PLCs, and contactor controls
Graphic display modules
Custom programming as the application requires
NEMA 4 and stainless steel enclosures
Pre-wired cables with festooning
Collision avoidance
Pre-Engineered Systems
Our standard Pre-engineered XLTX system is packaged with our Flex M Receiver for flexibility not found in most off-the-shelf systems.
Flex M Receiver Features
Full modular design
Offers two-way feedback
Part 15 900MHz
Synthesized RF, 32 channels
Panel mounted
Other configurations and RF frequencies are available for custom engineered systems.
We can build your system to your specifications-with our 18K, Flex M, or InteleSmart receivers, it's completely customizable.
Documentation
Telemotive XLTX Brochure
Telemotive Engineered XLTX Transmitter 178-01598-0100
XLTX/MBT/PGT Battery Charger 195-50479
Telemotive General Battery Charger Precautions TC10723-0
|
![](/Products/Radio%20Remote%20Control%20Products/images/TelemotiveXLTX.jpg)
|
|
|